Hypervolt Home 3 Pro Installed in High Wycombe

Answer capsule

We installed a Hypervolt Home 3 Pro 5m tethered charger at a High Wycombe property in HP15 6BW. The homeowner wanted their charger positioned to the left of the front door, which meant running cable from the consumer unit through the garage and around the exterior. One of our NAPIT-certified electricians planned a route that kept the cable hidden and protected, running it under the front door threshold. The customer is now charging regularly and very happy with both the charger and the app.

Why did this High Wycombe homeowner choose the Hypervolt Home 3 Pro?

The Hypervolt Home 3 Pro is a 7kW wall-mounted charger with a 5-metre tethered cable. It's ideal for homeowners who want a fixed charging point without the need for a separate cable management system. The tethered design means the cable is always there and ready to use — no hunting for leads or worrying about storage.

For this High Wycombe property, the 5-metre cable length was crucial. It gave us enough reach to run the cable from the consumer unit, through the garage, and around to the front door position the customer preferred. The Hypervolt app also appealed to them — they can monitor charging sessions and control the charger remotely, which is especially useful if they want to schedule charging during off-peak hours.

What was the cable routing challenge at this High Wycombe property?

Many Victorian and Edwardian homes in High Wycombe and the surrounding Chilterns area present cable routing puzzles. This property was no exception. The customer wanted the charger on the left-hand side of the front door, but there was no way to run cable from the rear of the property to reach that position.

Our electrician assessed the options during the free site survey and identified a practical solution. We ran the cable from the consumer unit into the garage, then routed it around the bottom of the garage exterior. This route kept the cable protected and out of sight. We then brought it under the threshold of the front door and terminated the charger on the left side, exactly where the customer wanted it.

The cable run was approximately 8 metres, which the 5-metre tethered cable of the Hypervolt Home 3 Pro handled comfortably. By planning the route carefully, we avoided any need for additional conduit or trunking beyond what was necessary for protection.

How long did the Hypervolt Home 3 Pro installation take?

This was a straightforward installation that took around 2-4 hours. Because the cable route was planned in advance and there were no complications with the consumer unit or DNO upgrades needed, the work progressed smoothly.

The time included:

• Running the cable from the consumer unit through the garage
• Routing it around the garage exterior
• Bringing it under the front door threshold
• Mounting the charger on the left side of the door
• Testing the installation and commissioning the charger
• Showing the customer how to use the app

A standard domestic EV charger installation typically takes 2-4 hours. If your property requires a longer cable run, consumer unit upgrades, or DNO notification, the work may take longer. That's why we always carry out a free in-person site survey first — we can tell you exactly what's involved before any work is agreed.

Is the Hypervolt Home 3 Pro right for a High Wycombe home?

The Hypervolt Home 3 Pro is a solid choice if you want a reliable 7kW charger with a tethered cable and smart app control. It's particularly good for homes where:

• You have a dedicated parking space (driveway, garage, or forecourt)
• You want the cable permanently attached and ready to use
• You prefer not to manage a separate charging cable
• You want to monitor and control charging via smartphone

For this High Wycombe customer, it ticked all the boxes. They've since told us they've managed to get quite a few charges in already and are really happy with the outcome.

If you're thinking about installing an EV charger at a High Wycombe property, the first step is a free site survey. We'll visit your home, assess the cable route from your consumer unit to your parking space, check whether any DNO upgrades are needed, and give you a clear picture of what's involved. Many Chilterns properties — especially older homes — need careful planning to get the cable route right, and that's exactly what we do.

What happens after installation?

Once the charger is installed and commissioned, you're ready to start charging. The Hypervolt app lets you:

• Monitor charging sessions in real time
• Set charging schedules
• Track energy usage
• Receive notifications when charging is complete

The customer at this High Wycombe property is already using these features to make the most of their charger. If you're interested in combining your EV charger with solar panels or battery storage, we can help with that too. Many homeowners in the Chilterns are now pairing their chargers with solar panel installation to reduce charging costs, or adding battery storage to maximise self-consumption.

Next steps

If you're ready to install an EV charger at your High Wycombe home, get in touch for a free site survey. We'll visit at a time that suits you, assess your property, and explain exactly what's involved — with no obligation and no forms to fill in. Call or WhatsApp us on 01494 977298.